Team Associated Releases the RC10T4.1 RTR 2.4GHz and RC10T4.1 RTR 2.4GHz Brushless!

Based on the 7-time National Champion RC10T4, the brushed RC10T4.1 is a fully assembled truck that features many of the components from the RC10T4 Team kit, while incorporating a totally new 2.4 GHz XP3-SS 3-Channel radio system and SHV1504 MG metal gear steering servo. Power is supplied by a 17-turn Reedy motor while the XP SC200 electronic speed control with LiPo cutoff provides smooth throttle control. A sealed gear differential improves reliability and allows fine tuning for different track conditions.

Brushless Version!! Based on the 7-time National Champion RC10T4, the brushless RC10T4.1 is a fully assembled truck that features many of the components from the RC10T4 Team kit, while incorporating a totally new 2.4 GHz XP3-SS 3-Channel radio system and SHV1504 MG metal gear steering servo. Power is supplied by a Reedy 3300kV brushless motor while the XP SC450-BL electronic speed control with LiPo cutoff provides smooth throttle control. A sealed gear differential improves reliability and allows fine tuning for different track conditions.

Discuss this item on the RC Driver Forum

LargeScaleRC.com Releases Some New Baja Parts

Jofer USA Wheel Wrench!
Jofer wheel wrenches for the HPI Baja are made from 6061-T6 aircraft aluminum, machined with chamfered edges, polished, and then anodized for a brilliant finish. These are the best looking parts on the market today. The handle is adjustable for preferred leverage. The wrench also works on the HPI shock caps. Retail Price is $38.99

Jofer USA Aluminum Window Nets and Window Frame!
Add great scale looks and a little Bling to Your HPI Baja 5B with the Jofer USA Aluminum window Nets and Window Frame set.

Jofer USA HPI Baja Wheel Nuts!
Jofer wheel nuts for the HPI Baja are made from 6061-T6 aircraft aluminum, machined with chamfered edges, polished, and then anodized for a brilliant finish. These are the best looking nuts on the market today. The helical nurling keeps the wheel nuts in place by digging into the wheel, keeping them from unscrewing and falling off. Retail Price $29.99.

IHP Racing Piston Stopper Tool!
This is the IHP Racing Piston Stopper Tool. They are a must have when working on your Large Scale R/C Gas Motor. They come in 5 great colors. Retail Price $8.99.

Discuss this item on the RC Driver Forum

Kyosho Releases The V-ONE RRR Shimo Edition

From it’s first World Championship victory in 2004, the V-One RRR has stood at the summit of the world racing scene where it’s overwhelming speed has been demonstrated on many occasions. Now Takaaki Shimo’s finely tuned version is available for everyone to enjoy. Included are specialized performance parts that Kyosho’s top development driver has added to an already super-fast V-One RRR. The inclusion of these parts come with Mr. Shimo’s signature color; silver. Many of these parts are not available separately, and are only found on the V-One RRR Shimo Edition. Based off of the V-One RRR Evo 2 chassis, Takaaki Shimo made an already great car even better by incorporating his years of experience with the best materials Kyosho has to offer.

Discuss this item on the RC Driver Forum

TGN Releases New Rib and Paddle Sand Tires for the Baja 5T

Sand Storm Front Tires and Rear Paddle Tires for HPI Baja 5T

We have our focus on area's other companies will shy away from. Baja 5T tires have really been ignored, but not from us. Here you can see the new front and rear Sand tires.

Advanced X4 Rubber Compound for maximum traction and minimal tread wear.

Axial Releases The Trail Honcho Truck Body

Trail Honcho Body
• Realistic cab with composite plastic molded rear cage with realistic diamond plate bed insert
• Spare tire carrier/mount
• Replacement polycarbonate body available without the rear cage
• Polycarbonate light buckets for the headlight and turn signal add to the realistic look
• Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more!
• Overspray film and pre-cut vinyl window masks make painting fast and simple.
• Dimple marks for body post drill locations.
• Made from durable .040” clear polycarbonate plastic for long life
• This body will fit the AX10 Scorpion, SCX10. Minor modification will allow this body to fit on other trucks currently on the market.

Team Associated Releases the ’09 Championship Body for your SC10, Blitz, Strike, or Slash

With smooth aerodynamic lines and unparalleled scale realism the Team Associated ’09 Championship body promises to be a race winner. A scale replica of the actual full-size body being raced by the top short course pro teams, right down to the included number plates and optional tail fins. Now you can update your SC10, Blitz, Strike, or Slash and begin your quest for a championship too!

AKA Releases 1:8 Wheel Adapters for the HPI Blitz

For those looking for better handling and a wider tire selection for their HPI BLITZ and Traxxas Slash 4x4, AKA is happy to announce the release of their 1:8 wheel adapters for the HPI BLITZ and Traxxas Slash 4x4 trucks. Made from 7075 aluminum and hard anodized, these wheel adapters are a great addition to either of these trucks. These adapters come with all necessary pieces for use and include AKA “SureGrip” 17mm nuts to keep the wheels securely on the hubs. The adapters install in just minutes and require zero modifications to the truck. The stock width and steering radius are kept in tact. Improve your tire choice and handling by getting a set of AKA 1:8 Wheel Adapters for your Blitz or Slash 4x4. All popular 1:8 buggy wheels can be used including the AKA PRO-5 wheel.

RPM Releases Front A-Arms for the Traxxas 1/16th Scale Mini E-Revo

RPM Releases Front A-Arms for the Traxxas 1/16th Scale Mini E-Revo
Upon the release of the 1/16th Scale Traxxas Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms durability for these little monsters has arrived!

Another problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.

RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms. What’s best is these miniature E-Revo A-arms, like all RPM molded products, are backed by our industry-leading breakage warranty. If it breaks (under normal operating conditions), send it in and we’ll replace it!

#80692 Front Upper & Lower A-Arms - Black: Suggested Retail Price $14.95 / Set
#80695 Front Upper & Lower A-Arms - Blue: Suggested Retail Price $14.95 / Set

Coming Soon
We are working away on completing a set of rear A-arms for the Mini E-Revo and expect them to be completed in early January. More details will come as we finalize our molds!

ST Racing Concepts New Option Parts for HPI Blitz Short Course Truck

The HPI Blitz was one of the most anticipated short course truck releases this year and it certainly did not disappoint. With great performance and pricing, the HPI Blitz is now one of the top choices for short course truck racing, and of course ST Racing Concepts, your short course truck option parts specialist, have a full line of option parts ready to take your Blitz to the next level both in performance and looks.

ST Racing Concepts CNC Machined Aluminum Front Caster Blocks, Steering Knuckle and Rear Hub Carriers for HPI Blitz
Precision CNC machined from high-grade aluminum, our caster blocks and steering knuckle greatly improves durability and adds that great factory looks to the front suspension of your HPI Blitz. Our rear hub carriers features a set-screw over hinge-pin design that securely keep the hub carriers on the hinge-pins, and also keep the wear to a minimum by making the hinge-pins rotate in the arms and not in the aluminum hub carriers while also increasing the durability and adds awesome factory look to your HPI Blitz. Available in Gun Metal, Orange, and Silver anodizing.

STH100311GM/O/S CNC Machined Aluminum Precision Caster Blocks (1 pair) for Blitz, E-Firestorm. MSRP: $19.99
STH100313GM/O/S CNC Machined Aluminum Precision Steering Knuckles (1 pair) for Blitz, E-Firestorm. MSRP: $19.99
STH103329GM/O/S CNC Machined Aluminum Precision Rear Hub Carriers (1 pair) for Blitz, E-Firestorm. MSRP $23.99

ST Racing Concepts CNC Machined Aluminum HD Front Shock Tower, HD Rear Shock Tower and Rear Camber Link Plate
Greatly reduces the flex of the stock plastic towers on your HPI Blitz with our CNC Machined Aluminum HD Front and Rear Shock Tower. These CNC machined aluminum heavy duty front and rear shock tower will add great looks and eliminate the flex in your shock tower, keeping your suspension operating true to its design. The rear camber link plate improves durability in this normally weak area on the short course truck with precision CNC machined aluminum. When used in combination with our rear shock tower, it provides a bullet proof combination for the rear of your HPI Blitz. Available in Gun Metal, Orange, and Silver anodizing.

STH85208FGM/O/S CNC Machined Alum. HD Front Shock Tower for HPI Blitz, E-Firestorm. MSRP $19.99
STH85208RGM/O/S CNC Machined Alum. HD Rear Shock Tower for HPI Blitz, E-Firestorm. MSRP $24.99
STH85207GM/O/S CNC Machined Alum. Rear Camber Link Plate for HPI Blitz, E-Firestorm. MSRP $14.99

ST Racing Concepts CNC Machined Aluminum Front Suspension brace, Front and Rear Chassis Brace and HD Aluminum Front Bulkhead.
The CNC machined front aluminum suspension brace is a great improvement over the stock piece providing much needed strength to the front suspension of your HPI Blitz. Most of the abuse in short course truck racing happens to the front lower suspension and this aluminum brace especially when used in combination with our Machined HD Aluminum Front Bulkhead, will greatly improve the durability of the front end of your HPI Blitz. The front and rear chassis brace help strength the front and rear end of the HPI Blitz chassis. The rear brace also acts as a stronger battery hold down support in the rear, while the front brace securely lock down and bridge over the steering servo in your HPI Blitz. Available in Gun Metal, Orange, and Silver anodizing.

STH103326FGM/O/S CNC Machined HD Aluminum Front Lower Suspension Brace for Blitz, E-Firestorm. MSRP $6.99
STH103326GM/O/S CNC Machined Aluminum Front and Rear Chassis Brace for Blitz, E-Firestorm. MSRP $12.99
STH100314GM/O/S CNC Machined Aluminum HD Front Bulkhead for Blitz, E-Firestorm.
MSRP $12.99

ST Racing Concepts CNC Machined Finned Aluminum Motor Mount, Aluminum and Graphite Battery Strap
The CNC Machined Finned Aluminum Motor Mount is milled for more cooling to the motor and also is machined with longer motor screw slots to allow for taller gearing ratios, especially when using brushless motors. The aluminum battery strap holds down the battery more securely over the flexible stock plastic piece and also adds a bit of weight at the center of the truck for slightly better stability, while the 3mm thick graphite battery plate is light weight and adds great factory looks to your HPI Blitz. Available in Gun Metal, Orange, and Silver anodizing.

STH85209AGM/O/S CNC Machined Aluminum Battery Strap for Blitz, E-Firestorm.
MSRP $10.99
STH85209C 3mm thick Light Weight Graphite Battery Strap for Blitz, E-Firestorm.
MSRP $19.99
STH103374GM/O/S CNC Machined Finned Aluminum Motor Mount for Blitz, E-Firestorm.
MSRP $10.99

ST Racing Concepts CNC Machined Aluminum HD Shock Caps, and Front and Rear Racing Threaded Shock Set
One of the most common weak links on most short course truck is the plastic upper shock caps, which tends to rip off the shock bodies during hard landing or a bad crash due to their plastic material. Our aluminum shock caps will greatly improve durability of your HPI Blitz upper shock mounting, and also adds great looks to your truck. When used in combine with our Front and Rear racing shock set, it provides the ultimate smoothness and durability in suspension for your HPI Blitz. The front and rear racing shock set features threaded aluminum shock bodies with O-ring installed pre-load collars in which the O-ring secures your pre-load adjustments in place. The shocks also features aluminum lower shock caps to keep the shock cartridge straight and flex free during suspension operation and heavy suspension compression. Available in Gun Metal, Orange, and Silver anodizing. (Note: all collars are anodized in Gun Metal for a distinguished look).

STH103317GM/O/S CNC Machined Aluminum HD Upper Shock Caps (4 pcs) for Blitz, E-Firestorm.
MSRP $13.99
STH85054GM/O/S CNC Machined Threaded Aluminum Front Shock Set 1 pair (w/lower caps, O-Ring Collars) for Blitz, E-Firestorm.
MSRP $19.99
STH85053GM/O/S CNC Machined Threaded Aluminum Rear Shock Set 1 pair (w/lower caps, O-Ring Collars) for Blitz, E-Firestorm.
MSRP $20.99

All ST Racing Concepts HPI Blitz option parts are available now through your local hobby shop or favorite online store. Get ready to take your HPI Blitz to the next level.

LRP Short Course Modified Motor Combo

Looking to upgrade your SC10, Slash, Blitz, or Strike with some serious brushless performance?

LRP has developed the perfect brushless system to upgrade your short-course truck. With features such as waterproof operation and sensored technology, this system promises to deliver better performance and higher speed to your short-course truck, in addition to the smoothest power delivery that only a sensored system can provide.

Ai Brushless Pro Reverse
Features:
• Brushed/Brushless
• Forward/Brake/Reverse
• Waterproof
• Auto set-up plug in and drive
• Sensored design
• LiPo safe

Short Course Modified
Features:
• Military-spec sintered rotor
• Hand wound
• Heavy-duty low-friction ball bearings
• Plug and play
• Sensored design
• ROAR legal for racing

Kimbrough Releases New 64 Pitch Brushless Gear Sizes

If you race in the 17.5, 13.5 or 10.5 brushless motor classes, you know that it is sometimes pretty hard to get the correct gear ratios with the current crop of gears (especially in the foam tire classes). Kimbrough Racing Products has addressed that issue with the release of their brushless-specific spur gears in 76T, 78T, 80T, 82T, 84T, and 86T sizes.

Venom Releases Their Silver Transmitter Bag

Now in Silver! The Venom Transmitter Bag holds the most popular pistol grip transmitters on the market today. The padded case secures your transmitter to prevent damage during transit. The smaller pouch is perfect for carrying transmitter accessories like spare crystal sets and batteries.

Hostile Racing Products Announces Their New Axle Boots For the HPI 5B and 5T

A distinctive feature of these boots is the "shock absorbing" edge. You will notice the bulge on the boots. When using HPI drive cups, they are designed to act as shock absorbers that will displace the energy of rocks and debris rather than create an immediate pinch that causes the cuts in the currently available boots. As an added bonus, they allow for easy fitment of the ringed versions of axle cups such as Turtle Racing, the new Phatdad cups, FLM and others.

Axial SCX10 - 1/10th Scale Electric 4WD Truck - Kit w/Trail Honcho Body

* Based on the popular SCX10 chassis

o Realistic c-channel steel ladder style frame for that real truck look
o Molded skid plate for less hang ups
o Realistic shock hoops with multiple mounting positions
o Coilover shocks – dual rate springs provide maximum off-road performance
o Battery tray with Velcro straps makes changing batteries easier and accommodates standard 7.2V stick packs and larger LiPo batteries
o Enclosed radio box protects receiver from dust and debris
o Slipper Clutch – enhances the durability of the drive train when in binds
o Pro-Line Flat Irons tires – Excellent traction and grip on most surfaces
o Beadlock Wheels – Real beadlock wheels, never glue tires again
o Proven durability – Axles and transmission are directly from the original AX10 Scorpion
* Trail Honcho Lexan Body
o Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more!
o Overspray film and pre-cut vinyl window masks make painting fast and simple.
o Dimple marks for body post drill locations.
o Made from durable .040” clear polycarbonate plastic for long life
o Realistic cab with composite plastic molded rear cage with realistic diamond plate bed insert
o Spare tire carrier/mount
o Realistic LED headlight buckets
* Durable composite rock sliders protect your body from damage and allows you to slide over rocks
* Realistic tube style front bumper with aluminum skid plates
* Functional spare tire/wheel included!
* LED light bucket set – Includes 7 different styles of light buckets to hold 5mm and 3mm LED lights. Also has realistic plastic lenses.
* All hex socket hardware

Tamiya Re-Introduces the Sand Scorcher

Tamiya Re-Introduces the Sand Scorcher
Tamiya is celebrating the 30th anniversary of the Sand Scorcher with an improved re-release of the model. The new improvements include more fine tuned parts. Just as the original, the updated Sand Scorcher features ribbed front tires and paddle rear tires. Since the Sand Scorcher and the Buggy Champ use the same chassis, the spare parts are interchangeable.

Specs & Features
• This is an Officially Licensed 1/10 scale R/C assembly kit of the Sand Scorcher.
• Comes equipped with full ball bearings to reduce friction loss.
• Type 540 motor included.
• Comes loaded with many top quality parts for improved performance such as:
• A duraluminum plate reinforced 2mm thick FRP main frame for added strength and
flexibility to ensure stability.
• Newly designed die-cast front and rear suspension arms, front axle, and wheel
hubs.
• Transparent case protects the R/C mechanisms. The lid can be easily detached by
cam locks.
• Reinforced front uprights.
• Redesigned oil dampers.
• Original blister pack style packaging.
• Detailed hard plastic body included.
• 2-channel R/C system and battery pack separately available.
• Can be used with separately available LF1100-6.6V Racing Pack (Item 55105).
• ESC Included