fbpx
Friday, March 29, 2024

Tag Archives: 22sct

TLR 25 Degree Brass Front Pivot Block for the 22 and 22.2.0 Series of Vehicles

TRL - 25 Degree Brass Front Pivot Block for the 22-02

This 50-gram front pivot block for the TLR 22 series of vehicles features a 25 degree kick-up, 5 degrees less than the stock 30 degree block, resulting in more speed when entering a corner. It is well marked for the …

Read More »

TLR 22SCT 2.0 Short Course Truck

TLR - 22SCT 22

The 22SCT 2.0 comes loaded with updates and option parts that top of the line competitors are looking for.  It features a bellcrank-style steering linkage, an updated body, revised caster blocks and spindles, Gen II Big Bore Shocks, new adjustable …

Read More »

Bell Crank Steering System for the 22 Series of Vehicles

TLR-22-Bellcrank-Steering

This bell cranks create less Ackermann throughout the turning throw making the vehicle less aggressive off-center and adding steering low speed with a greater outside wheel angle. It is a directly bolt on for all 22 platform vehicles and will …

Read More »

Pucks Shiny Drive System for the X-Factory X- 6³ and TLR 22SCT

Shiny Drive System for the X-Factory X-6³ for vehicles with motors 13.5 turns or higher provides all the speed and acceleration, and features replaceable Pucks that are made to handle the abuse of the Modified racer. Shiny Drive System provides …

Read More »

TLR 22SCT Build – Body, Wheels and Tires

TLR 22SCT Build

The Build – Part 10 In Part 10 we finish up our Losi 22SCT build; the body, the wheels and the tires. Four quick steps…let’s get to it! Build Notes: You’ll be using CA glue to bond the tires to …

Read More »

TLR 22SCT Build – Electronics

TLR 22SCT Build

The Build – Part 9 Part 9 is a set of short steps as well. We’re installing the electronics, however the manual doesn’t go into detail about where to mount the ESC or receiver. I’m installing them in the most …

Read More »

TLR 22SCT Build – Additional Chassis Parts

TLR 22SCT Build

The Build – Part 8 Part 8 is a short step; we’re basically bolting on the miscellaneous chassis bits prior to final assembly. Pretty easy. Build Notes: None. Start off by sliding the body posts down into the front body …

Read More »

TLR 22SCT Build – Shocks

TLR 22SCT Build

The Build – Part 7 The shocks (or dampers) on any car, onroad or off, are probably the most important, and overlooked, parts of the car. Built correctly, they will give you a distinct advantage over those that don’t take …

Read More »

TLR 22SCT Build – Transmission

TLR 22SCT Build

The Build – Part 5 In Part 5, I’ll be assembling the transmission of the TLR 22SCT. Although we have the option to build it as a MM (Mid Motor), I’ve opted to build it as a RM (Rear Motor) …

Read More »

TLR 22SCT Build – Rear Suspension

TLR 22SCT Build

The Build – Part 4 Part 4 of the TLR 22SCT build includes the rear suspension and rear shock tower. Carry on. Build Notes: Since you’ll be building the rear drive shafts in this step, you’ll want to make sure …

Read More »

TLR 22SCT Build – Front Suspension

TLR 22SCT Build

The Build – Part 3 The front suspension is up next, which includes turnbuckles, suspension arms, the shock tower and front bumper. Build Notes: You’ll be building turnbuckles in this step…never any fun. Have a few rags around to hold …

Read More »

TLR 22SCT Build – Front Bulkhead

TLR 22SCT Build

The Build – Part 2 Part 2 of our build revolves around the steering system and front bulkhead of the 22SCT. The steering is quite unique, utilizing a sliding rack design. It attaches to the upper plate and can be …

Read More »

TLR 22SCT Build – Servo Install

TLR 22SCT Build

The Build – Part 1 The 22SCT is a pretty free-flowing build. Up front it has us installing the servo and steering rack, so let’s get started. Build Notes: Pay attention to the servo chart on page 12. This will …

Read More »