The Build – Part 5 The front suspension of the Yeti features an independent design that is suited for floating over very rough terrain. The bulkhead is extremely narrow and the front has quite a bit of tuning adjustment to …

The Build – Part 4 In this step, we’ll be assembling the Yeti XL’s rear axle. It’s a pretty solid piece when completed and should seems like it will be able to stand up to some major abuse. The first …

After releasing several well received vehicles the folks at Hobby-Pro USA are set for yet another home run.  The SC01 Short Course Truck as they are calling it looks to utilize a 7075 aluminum alloy chassis and a can be use …

The Build – Part 3 The rear differential on the Axial Yeti XL is exactly like the front other than the shorter outdrives. If you had fun building the front diff, you’ll have fun building this one as well. Press …

The ProTek R/C Parallel Charge Board will charge up to four LiPo batteries simultaneously, and also balance the individual cells of each battery during the charge process. If charging four batteries simultaneously doesn’t satisfy demands, two Parallel Charge Boards can …

The Build – Part 2 Part 2 or our Axial Yeti XL build has us assembling the front gearbox. This step includes the installation of the front diff and bolting on the front shock tower. Let’s start by building the …

It is no secret that the people at Team Durango have been working on some new vehicles for a while now.  Well, today they released the above teaser image in reference to what will be hitting local hobby shops in …

RPM has released a new gear cover for the 2WD versions of the ECX Torment, Ruckus, Circuit & Boost. This cover has been designed to extend more towards the rear of the vehicle to help eliminate any debris from entering …

Schelle has reinvented the rear hub with the release of these unique parts for the Team Associated B5, B5M and T5M. Machined from aluminum, these hubs feature a symmetric lower part that can be used on either the left or …

The Build – Part 1 The first item on our Axial Yeti XL Build list is the front differential. It is a 1/8 scale diff that is fluid filled and features durable sun gears, able to withstand some pretty hefty …

Hot and new manufacturers who “make” brushless electronic speed controllers and motors seem to be releasing the next big thing all the time these days, only to be replaced by something newer and better just months, or even weeks later.  …

Team Associated has added these great-looking shock shaft pliers to their tool lineup. Filtered under the Factory Team name, these pliers feature 3 holes for holding shafts from 3.0-4.0mm in size. The holding area is smooth so as to not …

  HPI/Hot Bodies has announced the D815 Tessmann Worlds Edition 1/8 buggy based on the same car Ty drove to win the 2014-2015 World Championships in Sicily. This car features alot of improvements over the D812 including new, aluminum caster …

The Cx3-II by X-Rider is a 1/10th Motorcycle that is 206mm in length, 54mm in width, and 100mm in height. It has a wheelbase of 145mm and is equipped with some awesome electronics, such as the Hobbywing 30T, 3060KV brushless …

With four compartments for AA batteries and four compartments for AAA batteries the X4 is able to charge both AA and AAA batteries simultaneously. Due to the different capacity, you could set the charge rate accordingly or set all at …