If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT-T option parts currently available.
Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
Features
Your fast track to nitro truggy racing
4mm T-6 aluminum chassis plate
Spektrum™ ultra-torque waterproof metal-gear steering servo
Gen III radio tray for longer servo life
Dynamite® .28 nitro engine with pull start
Metal-gear transmission and sealed differentials
Pre-set suspension geometry
Center and rear dogbones
15mm adjustable oil-filled shocks
Spektrum™ waterproof metal-gear servo
Includes Spektrum DX2E DSMR® transmitter
Includes Dynamite 1600mAh 6V NiMH receiver pack
Product Specifications
Type:Nitro Truggy
Scale:1/8
Length:18.75 in (476mm)
Width:16.38 in (416.1mm)
Height:7.30 in (185.5mm)
Wheelbase:14.93-15.09 in (379-383mm)
Chassis:4mm Plate, Aluminum
Suspension:4-wheel Independent
Drivetrain:4WD
Tire Type:Losi XTT
Motor or Engine:Dynamite .28 Nitro Engine
Radio:DX2E
Servos:Included
Batteries:Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch:1.0Mod
Kit/RTR:RTR
Shock Type:15mm bore, Composite
Body:Painted/Screened
Ball Bearings:Full Precision Ball Bearings
Fuel Tank Capacity:150cc
Experience Level:Beginner
Recommended Environment:Outdoor
