This screw set for the new RC8B3 replaces 92 of the stock screws with stronger and lighter titanium units. This kit only includes screws the engineers at Team Associated deemed appropriate to be replaces with titanium counterparts and comes with …
Read More »
The TC02C-EVO Team Edition Mid-Motor 2WD Buggy will include the most sought after upgrades for higher performance and increased durability. Some of these must have features include an aluminum rear shock tower, aluminum rear arm mount, aluminum servo saver and steering …
Read More »
Based off of the successful Natrix 748 Nitro Touring car, the Natrix 748-e (electric) 1/10 200mm Touring Car has been optimized to run on either 2S or 3S LiPo battery packs with appropriate speed controls. It features a 2-belt drivetrain, …
Read More »
The LRP iX8 Version 2 features a new hardware and is already equipped with the latest v2.6 team firmware as standard. It generates significantly less heat and its performance in racing conditions is extremely consistent. Aggressive Initial Drive settings and …
Read More »
Check out what the people over at Pro-Line are cooling up! Prime 2.8″ Tires are set to be released later this month. They will be available in the M2 compound, Pre-Mounted with Closed Cell Foam. Primes will be offered mounted to …
Read More »
The brushless RC10B4.2 is now available with a 3300mAh Reedy Wolfpack battery and 423-S 35W Compact Balance Charger. Delivered in one of two hot paint schemes, this release includes a water-resistant brushless esc and 3300kV motor, sealed receiver box, and blue anodized V2 …
Read More »
3Racing’s Sakura D4 AWD and RWD are the hottest drift cars being talked about right now, so you know what comes next. It’s pre-order time! Our friends over at AsiaTees let us know that If you’re ready to pre-order this …
Read More »
These front and rear shock towers for the SCT410.3 and EB48SL are 6mm lower than the original SCT410 towers and should only be used with TKR5515 and TKR5516 suspension arms. They are made from 5mm thick carbon fiber with the …
Read More »
The unique handle design of the 17mm Wheel Wrench and Shock Cap Tool is comfortable in the hand and provides much more leverage versus traditional designs. This is accomplished by a longer handle that has ergonomic chamfering throughout to deliver the …
Read More »
Adjust the rebound and compression separately similar to the way you would a real vehicle with MIP Bypass1 Team Tuned Kit for the T5M and SC5M. The all new piston features a new design that provides much more initial pack …
Read More »
Our friends over at rcMart have a cool video of the hotly anticipated 3Racing Sakura D4 RWD and AWD. From the looks of things these new vehicles are going to be great so be sure to get on the waiting list …
Read More »
The X2 AC Plus charger features dual inputs that afford flexible battery charging at home and in the field. Innovative power distribution mode lets you efficiently assign output power based on individual battery requirements. Capable of charging all battery chemistries, …
Read More »
This chassis kit takes the sporty TT-02 Type-S chassis and includes a number of parts to turn it into a drift spec machine. It features 5-spoke wheels are fitted with 24mm-width SuperDriftech tires, torque-tuned motor and aluminum heat sink. Other …
Read More »
The TT-02B chassis is a highly popular entry-level shaft-driven 4WD buggy. This version gets a makeover with a number of option parts for enhanced performance such as an aluminum driveshaft, fiberglass reinforced plastic (FRP) shock towers, full bearings and more. …
Read More »
The shaft-driven 4WD TB-04 chassis now comes loaded with a bundle of performance-enhancing option parts. All resin/plastic parts have been replaced with carbon fiber-reinforced pieces to improve performance and durability. Suspension arms, uprights and aluminum mount designs are the same …
Read More »
