The GT-300W 1/12 scale pan car is the newest edition to the Team Saxo vehicle lineup. This onroader features a carbon fiber chassis, blue aluminum arm mounts, center shock mount and steering as well as a blue aluminum rear pod. …
Read More »
AVID RC has released this 2mm, aluminum chassis for the Team Associated TC6.2. Features include a 7075-T6 aluminum chassis with weight-saving cutouts, milled battery tape slots and tape tunnel on the underneath of the chassis as well as a narrower …
Read More »
These front and rear shock towers for the SCT410.3 and EB48SL are 6mm lower than the original SCT410 towers and should only be used with TKR5515 and TKR5516 suspension arms. They are made from 5mm thick carbon fiber with the …
Read More »
The unique handle design of the 17mm Wheel Wrench and Shock Cap Tool is comfortable in the hand and provides much more leverage versus traditional designs. This is accomplished by a longer handle that has ergonomic chamfering throughout to deliver the …
Read More »
Tuning Haus has released this cool set of billet aluminum setup wheels designed to work with any vehicle that utilizes a 4mm threaded axle. A rubber o-ring surrounds the wheel to keep from marring your setup surface, and a nice …
Read More »
Adjust the rebound and compression separately similar to the way you would a real vehicle with MIP Bypass1 Team Tuned Kit for the T5M and SC5M. The all new piston features a new design that provides much more initial pack …
Read More »
The X2 AC Plus charger features dual inputs that afford flexible battery charging at home and in the field. Innovative power distribution mode lets you efficiently assign output power based on individual battery requirements. Capable of charging all battery chemistries, …
Read More »
This chassis kit takes the sporty TT-02 Type-S chassis and includes a number of parts to turn it into a drift spec machine. It features 5-spoke wheels are fitted with 24mm-width SuperDriftech tires, torque-tuned motor and aluminum heat sink. Other …
Read More »
The TT-02B chassis is a highly popular entry-level shaft-driven 4WD buggy. This version gets a makeover with a number of option parts for enhanced performance such as an aluminum driveshaft, fiberglass reinforced plastic (FRP) shock towers, full bearings and more. …
Read More »
The shaft-driven 4WD TB-04 chassis now comes loaded with a bundle of performance-enhancing option parts. All resin/plastic parts have been replaced with carbon fiber-reinforced pieces to improve performance and durability. Suspension arms, uprights and aluminum mount designs are the same …
Read More »
The officially-licensed Cadillac ATS-V.R. from PROTOform is ideal for 1/10 190mm Touring Cars. Designed for classes such as USGT, GT10, and Spec Grand Touring, this 2-door coupe race body is formed from.030” Lexan and includes injection-molded wing struts to support a unique rear …
Read More »
Reedy’s SC600-BL Brushless ESC is water-resistant for maximum reliability and features a compact footprint that allows for easy installation in most 1:10 vehicles. It is standard equipment in many of Team Associated’s 1:10 scale RTR vehicles and is the logical …
Read More »
It’s kind of appropriate the Tamiya releases a scale model of the Nissan GT-R LM Nismo that is based on the Prototype 1 Hybrid (LMP1-H) run at LeMans. This beautiful body has sits atop Tamiya’s F103GT chassis, a 2WD pan …
Read More »
Available in blue and black with all of the same features you loved about the original Mini 8IGHT like a brushless power plant with 4500kV motor and shaft driven 4wd drivetrain, the newest version of the successful Mini 8IGHT now …
Read More »
Utilizing a heavy-duty 775-size motor, the Factory Team Compact Starter Box features moveable pegs that adjust to fit almost any 1:10 and 1:8 scale nitro car, on road or off-road. To use, slip car over pegs and push down on …
Read More »
