Thirty years after its initial release the Hornet is back, and with a Black Metallic look. It has all the vintage features like a solid rear axle with oil-filled shocks, independent swing axle front suspension with friction shocks, sealed gearbox and …
Read More »
This is a special re-release of the popular Mountaineer. The revamped 4×4 chassis is the same as the 2012 re-release of the Toyota Bruiser and features a realistic three-speed transmission and a solid axle leaf spring suspension. The original layout …
Read More »
The always-popular Midnight Pumpkin gets a reboot, so to speak, with this Lowride Pumpkin. It has the same classis look and now sits on the popular M06 chassis. A cool front bumper/push bar will help keep the body well-protected should …
Read More »
The ENEOS SUSTINA, a Japanese Super GT Series entry, is based on the Lexus coupe released in 2014. The body sits on an efficient TB-04 chassis and uses a shaft driven drivetrain with sealed gear differentials. The double-wishbone suspension system …
Read More »
The TRF101W features redesigned carbon fiber upper and lower arms to improve durability and enhance performance. The chassis is now 2.5mm thick to provide greater flexibility and increase traction on low-grip surfaces. Battery posts have been moved forward, transferring pitch loads …
Read More »
The Spyder SRX2 RM Short Course Truck features a composite chassis and shock towers, durable large front and rear bumper, a ball-differential, slipper clutch, extra-long suspension arms, big-bore 12mm hard-coated shocks, SC body with flares, SC wheels, spring steel metal …
Read More »
This compact, well-priced charger from Duratrax can balance charge 2S – 4S LiPo and LiFe packs with a Traxxas connector. It has a 3A maximum charging rate, utilizes LEDs to indicate individual cell charging and has gold-plated connectors. Drive on …
Read More »
Bring your TCXX up to speed with this upgrade pack from HPI. It features rebuildable DCJ V2 driveshafts, a one-piece servo mount, a V2 motor mount that moved the motor closer to the center line of the car, shorter length …
Read More »
MIP’s SCX10 axles now incorporate a pin set screw for attachment as opposed to dual set screws. Along with that improvement, they have also changed the drive hubs so that there is no longer any interference when it comes to …
Read More »
The RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes the rigidity while absorbing additional impact energy. They are available in RPM blue and black. …
Read More »
The Jeep Wrangler G6 Falken Edition bears the special edition livery that echoes Falken’s established legacy. The SCX10 features a Poison Spyder Rock Brawler front bumper, a dovetail universal bolt-in cage, and a roof mounted light bar. With Falken Wildpeak …
Read More »
The rear aluminum bulkhead for mid motor converted vehicles is machined from high quality 7075-T6 aluminum and is laser-etched. This makes for a solid base for the upper camber link mounts but also the wing mounts. It is designed to …
Read More »
STRC has a host of goodies ready for release for the B5 and B5M. There are carbon fiber battery straps, machined aluminum front hinge pin braces in blue, gun metal and silver and a 25 degree front bulkhead also available …
Read More »
Schelle Racing has released an updated steering rack for Kyosho RB6/RT6/SC6 owners. This zero-slop setup features an aluminum rack with Ackermann adjustments as well as a wide steering pivot option. It rides on a set of quality bearings (instead of …
Read More »
The DX4C offers a 20-model memory and the signal security of DSMR control. The software includes programming for AVC (Active Vehicle Control) receivers for fun and control. Thanks to its SD card slot, you will always be able to upload …
Read More »
