TLR 22SCT Build

The Build – Part 10 In Part 10 we finish up our Losi 22SCT build; the body, the wheels and the tires. Four quick steps…let’s get to it! Build Notes: You’ll be using CA glue to bond the tires to …

The Build – Part 9 Part 9 is a set of short steps as well. We’re installing the electronics, however the manual doesn’t go into detail about where to mount the ESC or receiver. I’m installing them in the most …

The Build – Part 7 The shocks (or dampers) on any car, onroad or off, are probably the most important, and overlooked, parts of the car. Built correctly, they will give you a distinct advantage over those that don’t take …

The Build – Part 6 The next step in our TLR 22SCT build is attaching the transmission and rear bumper to the chassis assembly. Again, we are building the 22SCT in the RR (Rear Motor) design so your steps for …

The Build – Part 5 In Part 5, I’ll be assembling the transmission of the TLR 22SCT. Although we have the option to build it as a MM (Mid Motor), I’ve opted to build it as a RM (Rear Motor) …

The Build – Part 4 Part 4 of the TLR 22SCT build includes the rear suspension and rear shock tower. Carry on. Build Notes: Since you’ll be building the rear drive shafts in this step, you’ll want to make sure …

The Build – Part 3 The front suspension is up next, which includes turnbuckles, suspension arms, the shock tower and front bumper. Build Notes: You’ll be building turnbuckles in this step…never any fun. Have a few rags around to hold …

The Build – Part 2 Part 2 of our build revolves around the steering system and front bulkhead of the 22SCT. The steering is quite unique, utilizing a sliding rack design. It attaches to the upper plate and can be …

The Build – Part 1 The 22SCT is a pretty free-flowing build. Up front it has us installing the servo and steering rack, so let’s get started. Build Notes: Pay attention to the servo chart on page 12. This will …