Pro-Line PRO-MT 4×4 1:10 4WD Monster Truck Pre-Built Roller
The PRO-MT 4×4 was designed and built from the ground up to be the most Extreme 1:10 Monster Truck ever created while delivering the Durability and Performance you have come to expect from Pro-Line. Pro-Line has over 35 years of experience making the highest quality and best performing accessories and we used that experience to create the ultimate Go Anywhere – Do Anything 4×4 Monster Truck. Bashing has never been so good! The PRO-MT 4×4 has race-bred DNA similar to 1:8 Race Buggies for expectation shattering Performance combined with Extreme Durability,
The PRO-MT 4×4 comes as a Pre-Built Roller, so you just install your own electronics by following the included Instruction Manual, paint your body with your favorite paint job, and Go Have Fun! If you are ready to graduate up from the Ready-to-Run vehicles that currently occupy the 1:10 Monster Truck market and you want true next-level Performance the PRO-MT 4×4 is the truck for you. The PRO-MT 4×4 does not include electronics, paint or the tools required to operate or maintain the truck.
The PRO-MT 4×4 is unlike any other Monster Truck available because it was designed from the ground up to have the highest quality components and the best performance right out of the box. No need to spend tons of money on upgrades like all the other trucks available… the PRO-MT 4×4 has the upgrades you need already included making it the best value for the money! Every part of this 1:10 Monster Truck was designed from Day 1 to handle today’s extreme brushless power systems, including insane 1:8 Motor Systems and 4S LiPo Power. This has never been done in a truck of this size and Pro-Line is proud to bring it to you! Read below for more details on specific features.
ALUMINUM & STEEL BI-METAL CHASSIS
Durability meets Performance with Pro-Line’s PRO-MT 4×4 Aluminum & Steel Bi-Metal Chassis. The full length 3mm thick Gun-Metal Anodized 6061 T6 Aluminum Chassis combines with a 3mm thick Hardened Steel Spine extending from the Center Diff to the Rear Diff for Maximum Chassis Stiffness and Durability.
FRONT/REAR & CENTER SEALED DIFFERENTIALS
The Transmission is the Heart of any vehicle and the PRO-MT 4×4’s heart is based on Race Proven Technology. Each Diff can be tuned with different weight oils and the Internal Diff Gears are all Steel construction. The 3 Diff setup ensures that Power is always being sent to the wheels and is not being robbed by a traditional slipper. Oversized Ball Bearings are used throughout for free spinning operation.
HUGE 16MM BIG BORE SHOCKS
The PRO-MT 4×4 comes standard with Huge 1:8 Size 16mm Big Bore Shocks that take on any terrain. The shock bodies are Gun Metal Anodized CNC machined Aluminum and threaded for precision ride height adjustment. The shock internals feature a single X-Ring seal, Delrin Pistons & Shafts Guides, and Hard Chrome Coated Shock Shafts just like our high end race style Pro-Spec Shocks!
FRONT PIVOT BALL SUSPENSION
The front suspension features hardened steel Pivot Balls with Delrin Pivot Inserts that devour hits from all angles. Extra thick upper and lower control arms are designed to take a beating and are mounted to Aluminum Arm Mounts with Plastic Hinge Pin Inserts similar to 1:8 Race Buggies. Front and Rear Sway Bars come standard and Lock Nuts are used everywhere possible to prevent screws from backing out!
MOD 1 GEARS FOR EXTREME 1:8 POWER
Pro-Line chose 1:8 style MOD 1 size gears for the PRO-MT 4×4 to achieve the absolute maximum in gear tooth durability. The Front/Rear Ring & Pinion Gears are made from High Strength Hardened Steel using the latest in manufacturing technology. The PRO-MT 4×4 gears are insanely Strong!
