The Build – Part 8 The final step to the Speed Passion LM-1 LeMans involves installing the electronics and the absolutely stunning LM-1 body. Big props to Brad Palmer at F1 RC Labs for his amazing paint work! Build Notes: …
Read More »
The Build – Part 7 In this step we attach the tire/wheels to the car as well as the body mounts. We also top the LM-1 off with one of the most amazing bodies I’ve ever seen. Thanks to Brad …
Read More »
It took about a month to get Project Ugly Truck together in our spare time, but we did it, it’s done and it actually looks pretty cool. When we dug through a bin of parts and pulled out random pieces …
Read More »
What started off as a build deemed Ugly Truck because of the use of random parts of varying colors has actually grown on us. We think it’s looking pretty good and whoever we give it away to will most likely …
Read More »
Congratulations, you made it to part three of our Ugly Truck project build and we’re now building the business end of the truck, the transmission and suspension. Once again we’ll be bolting on a miss-mash of parts we found in …
Read More » The Build – Part 6 Time to build the center shock. We’ll also be attaching the upper deck in this step as well. Build Notes: Since we’ll be building the center shock at this time, have a few clean rags …
Read More » The Build – Part 5 This step is a short one and involves assembling the rear suspension; basically the rear damper, side springs and center shock mount. Build Notes: The side springs are a little bit delicate, so take care …
Read More »
Last week we announced the start of Project Ugly Truck (UT), the truck being built from a box of extra Traxxas components we’ve gathered over the years. We unearthed a lot of cool parts from the bin, but they don’t …
Read More »
RC Driver magazine has been around for over ten years and during those years we’ve built a ton of project vehicles. When projects are created, stock parts are pushed aside, but they are not thrown away or even forgotten. …
Read More » The Build – Part 4 If Part 4 of the LM-1 build, we assemble and attach the front end. It’s a simple, double a-arm setup that features a pillow-ball upper arm for quick and easy camber adjustments. Build Notes: Threadlock …
Read More »
The Build – Part 8 Part 8 is a short step; we’re basically bolting on the miscellaneous chassis bits prior to final assembly. Pretty easy. Build Notes: None. Start off by sliding the body posts down into the front body …
Read More » The Build – Part 3 The LM-1 uses a unique dual-bellcrank steering system, a setup found mostly in offroad and touring cars. This setup makes the steering feel (and react) a bit differently than a direct-setup and I’m actually loving …
Read More » The Build – Part 2 The next step of our Speed Passion LM-1 LeMans build is the assembly of the rear axle. We’ll also be assembling the differential as well. Build Notes: While not the norm, we do have to …
Read More » The Build – Part 1 Part 1 of the Speed Passion LM-1 LeMans build involves assembling the rear pod. Build Notes: Even though the instructions tell you what bag you need to open for each step, it’s not 100% accurate. …
Read More »
Earlier this year, I built an 1/5 scale HPI Baja based gasoline powered asphalt burner that was featured on the pages of RC Driver magazine’s September 2013 issue. Within a few weeks of the magazine spread I received a phone …
Read More »
