RPM has clearly been listening to its customers and have been hard at work. Now available are RPM A-arms & mud guards for Arrma 4S V2 Kraton & Outcast vehicles.
RPM Front A-arms for the 4S v2 ARRMA Kraton & Outcast
RPM Front A-arms for the 4S v2 ARRMA Kraton & Outcast are designed primary for strength and durability but RPM added a few extra features in as well.
First is slop elimination. RPM Front A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better steering response and more consistent camber, caster and toe angle settings.
RPM’s next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This shock position allows the suspension to lay down a little further, dropping the ride height for a lower center of gravity and better cornering stability.
RPM’s most important update is durability. RPM’s new A-arms are massive and uniform in thickness across their entire length! All RPM A-arms are molded from RPM’s ultra tough blend of engineering grade nylons for performance you can rely on when conditions are at their worst!
RPM Rear A-arms for the 4S v2 ARRMA Kraton & Outcast
Rear A-arms for the 4S v2 ARRMA Kraton & Outcast – #81792RPM Rear A-arms for the 4S v2 ARRMA Kraton & Outcast are designed primary for strength and durability, but RPM added a few extra features in as well.
RPM Rear A-arms reduce the amount of movement of the A-arm at the hinge pins. A tighter fit provides better throttle response and more consistent camber and toe angle settings.
RPM’s next improvement is the addition of a third shock mount hole centered between the two stock shock mounting holes. This shock position is a great mid-point between the two extreme options provided by the stock mounting holes.
Last and most importantly, durability has been addressed. RPM’s new A-arms are massive and uniform in thickness across their entire length! All RPM A-arms are molded from RPM’s ultra tough blend of engineering grade nylons for performance you can rely on.
RPM Rear Mud Guards for the 4S v2 ARRMA Kraton & Outcast
Rear Mud Guards for the 4S v2 ARRMA Kraton & Outcast – #81962RPM Rear Mud Guards for the 4S v2 ARRMA Kraton & Outcast help prevent dirt and mud build-up in your rear suspension and drive-line components. RPM Rear Mud Guards keep the debris kicked up by your front wheels off of the rear shocks, turnbuckles and driveshafts. By keeping those components clean, your suspension and drive-line will last longer and run much smoother between cleanings.
RPM Mud Guards are extremely lightweight (weighing in at only 8.5g. each). RPM Mud Guards are sold in pairs and include mounting hardware (unlike stock ARRMA mud guards). RPM Mud Guards are molded in RPM’s engineering blend of incredibly strong nylons. For protection you can trust, look no further than RPM.
For more information, visit: RPM
