Today we are treated to the release of the RPM N2O Resto-Mod Wheels and Shotgun Style Intake & Blower. Two cool new products from RPM to further dress up your RC rides. For the on-road scene are these great looking N2O Resto-Mod Sedan Wheels which are available in Gloss Black or Chrome. The Shotgun Style Mock Intake & Blower is a great way to add some scale engine detail to 1/12 – 1/8 scale bodies.
N2O Resto-Mod Sedan Wheels
N2O is the chemical formula for Nitrous Oxide, one of the most powerful fuel additives on the planet! It’s also the formula for one of the best-looking resto-mod wheels from RPM, specifically designed for your favorite muscle car. Whether you’re running a classic like the 1970 Chevelle or a 1972 C10 Pick-Up truck or perhaps your ride is a modern masterpiece like the Hellcat or Camaro that could use some resto styling with a modern appeal, the RPM N2O wheels will add that resto-mod flare your stock wheels are lacking.
Not only are the RPM wheels some of the best-looking wheels available, they’re made in the USA and molded from RPM’s bulletproof blend of engineering grade nylons for long-lasting performance and durability.
#81552—“N2O” Gloss Black Resto-Mod Sedan Wheels
#81553—“N2O” Chrome Resto-Mod Sedan Wheels
Tech Notes:
RPM N2O wheels are designed specifically for the Kyosho Fazer Mk2 line but will fit many sedans running 26mm wide wheels (spacers may be necessary for hex nut style axles). Wheel offset is +4.7mm (standard for Kyosho Fazer Mk2 models). RPM recommends 64mm diameter tires for Kyosho models (Chevelle, Charger, Camaro and Hellcat although 67mm gives a taller sidewall for a beefier stance). When using 67mm tires, a gearing change made be necessary.
Chrome Shotgun Style Mock Intake & Blower
RPM is adding another intake style to its line up with the RPM Shotgun Style Mock Intake & Blower. RPM’s newest scoop design perfectly mimics the more modern trend of a double-barrel shotgun hood scoop and looks incredible on a wide variety of 1/12th – 1/8th scale vehicles. RPM Shotgun Style Mock Intake & Blower Set will take the scale realism of your favorite muscle car or monster truck to a whole new level and show off that muscle you know it has!
The RPM molded Shotgun Style Intake and Blower is finely detailed with such finishing touches as blower belt ridges, pulley splines, and recessed butterflies in the scoop. Additionally, RPM made it simple to bolt it on to almost any hood that is relatively flat by angling the entire unit to 7°, a very typical hood slope. That means the blower unit will sit properly and accurately on a wide variety of applications. It all bolts together with only 3 small screws.
Each RPM Shotgun Style Intake & Blower comes complete with all the hardware you’ll need to bolt it to your favorite ride (you’ll need to supply your own 1/8” diameter (3mm) drill & a 2mm hex driver). It even includes a wide support plate that bolts underneath the body to prevent hard impacts from ripping the blower assembly off of your vehicle.
Tech Notes:
The RPM Shotgun Style Mock Intake & Blower Set is for appearance only and is not a functioning unit. RPM warranty restrictions may apply due to the scale nature of the design. Please see the RPM warranty page at www.rpmrcproducts.com/faq/warranty.htm for more information.
For more information, visit: RPM
